How To Identify The Quality Of Aluminum Veneer Manufacturers

The quality of aluminum veneer is the focus of every customer who buys aluminum veneer. The quality of aluminum veneer directly affects the later effect, safety and maintenance cost of the whole project.So how do consumers identify the quality of aluminum veneers purchased from manufacturers?

1. Observe the flatness of aluminum veneer

Generally the naked eye can determine whether the surface of the aluminum sheet formation, and then carefully observe whether bending place, usually professional aluminum veneer manufacturer in the process of production of aluminum veneer, from material selection to process has a set of complete system and process, cengcengbaguan, production and processing equipment and production staff of technical level of aluminum veneer of flatness caused certain effect, in general, aluminum veneer after nc machine tool pressure height is 2 cm long, keep after bending 90 degrees, so, when consumer is buying can be the reference to the preliminary judging the quality of the aluminum sheet.

2. Observe the surface coating of aluminum veneer

    Most outstanding specialized aluminum veneer manufacturers are using high standards of imported products, such as fluorocarbon lacquer adopted by the fluorine-carbon aluminum single sheet is currently on the market, more advanced and better coating can ensure good coating paint more luster, more resistant to corrosion, etc., in addition to need a good coating, also need advanced spraying equipment, is now larger aluminum veneer manufacturers are generally USES the automatic electrostatic spraying line, good equipment can better ensure the paint uniform density. Usually aluminum veneer manufacturers in the dust-free workshop spraying operations to ensure that no dust mixed, to ensure that the finished product surface smoothness and no color difference, feel is more smooth. Therefore, when consumers buy aluminum veneer, they can analyze the quality of the aluminum veneer from the quality of its surface coating.

3. Observe the thickness of aluminum veneer

    There are many kinds of aluminum veneer thickness, also have different USES, the thickness of the larger suitable for outdoor, the thickness of the smaller suitable for indoor, but whether indoor use or outdoor use, the thickness of the molding system. Standard aluminum veneer thickness uniform, will not appear on the same piece of product thickness, carefully observe the thickness of aluminum veneer, there are some shoddy aluminum veneer, its wall thickness error is relatively large, relatively thin in the middle, the product in the joint gap will be larger.

4. Test the compressive resistance of aluminum veneer

    Consumer can through you push hard on the aluminum veneer middle, observe whether aluminum veneer is the distortion, general and high grade aluminum veneer products are of high strength, resistance to pressure is very good, can meet the national standard scope of decorative materials, but there are some quality is not very good aluminum veneer products, resistance to pressure is not so good, you push hard on the deformation will occur and such products when used for exterior wall decoration, it is hard to bear the external force of pressure, prone to deformation or even fall off, the long period of time is very unsafe.